Troubleshooting Appliance Electronic Control Boards
[s2If current_user_cannot(access_s2member_ccap_gws_screencast)]
Learn from the Samurai and become a troubleshooting master!
Using a Whirlpool dishwasher as a case study, the Samurai explains each step in the process of troubleshooting electronic control boards in appliances, revealing the schematic mysteries to all who want to learn.
In this 38-minute video, you will learn:
- Basic troubleshooting techniques with broad applications to all appliances
- How to use tech sheets properly
- How to get those control boards to talk to you
- How to identify suspected problems using the schematic diagram
- How to formulate a troubleshooting strategy based on schematic analysis
- How to identify where to make electrical measurements
- About triac-gated neutrals in AC loads with standing voltage
- The difference between loading and non-loading voltage meters and when and why to use each
…and much more!
Here are a few tantalizing screenshots of the presentation…
One small price of admission gains you lifetime access to this valuable training video as well as the ability to ask follow-up questions in the comments section. Watch it as many times as you like as part of your journey to become a Master Samurai Tech!
Note: if you are enrolled in Advanced Schematic Analysis and Troubleshooting, then you have access to this presentation in your course materials.
Pricing:
$25
[/s2If]
[s2If is_singular()]
[_s2If current_user_can(access_s2member_ccap_gws_screencast)]
Did you find this presentation enlightening? Find more appliantologically empowering videos like this in the Advanced Schematic Analysis and Troubleshooting training course, available here at Master Samurai Tech.
[_else]
[__s2If current_user_can(access_s2member_level0)]
Select your Billing Method below to watch the screencast for only $25! The screencast will appear here after you complete the checkout process.
[s2Member-Pro-Stripe-Form level=”*” ccaps=”gws_screencast” desc=”A Master Samurai Tech Presentation: Troubleshooting Appliance Electronic Control Boards” cc=”USD” custom=”mastersamuraitech.com” ra=”25.00″ rp=”1″ rt=”L” rr=”BN” coupon=”” accept_coupons=”0″ default_country_code=”US” captcha=”0″ success=”/troubleshooting-appliance-electronic-control-boards/” /]
[__else]
You must be logged in to access this content! If you already have an account, click here to login. Otherwise, use the form below to create a free account. Then come back here to the blog to continue!
[s2Member-Pro-Stripe-Form register=”1″ level=”0″ ccaps=”” desc=”Signup now, it’s Free!” custom=”mastersamuraitech.com” tp=”0″ tt=”D” captcha=”0″ /]
[/__s2If]
[/_s2If]
[else]
Click here to begin your journey of Total Appliance Enlightenment!
[/s2If]
Wish I didn’t miss the free version, but I’m sure it’ll be worth the money! 🙂
Hi Smashy,
We had some audio bugs in the webinar version so this presentation is a complete re-do with just me.
After watching the screencast, I’d love to hear your comments, criticisms, questions, suggestions for improvement, and, of course, accolades! You can post them right here in the comments section so everyone can read them, too.
Domo!
Samurai
Ok, just watched it. VERY informative and helpful! I learn something new with everything you present like this. The only “critique” I would have is that I wish there was a quiz with it. I know there can’t be quizzes with everything, but it would be helpful to me if that’s at all possible. 🙂
Other than that, very straightforward and understandable. Very much worth the money.
Thanks, Smashy! Quizzes are something I may do in the future and then offer the presentations as “mini-courses” if there’s enough demand for it. Thanks for your comments!
Yes sir got some good info here. One thing though on that p52 connection how did you deduce that particular point on the trace whas 2. Why not the node above it. Please explain
Hi Chris, good question. For others reading this, I start explaining how to locate the mysterious and elusive P5 “connector” at 26:50 in the video. A closeup of the specific location you’re referring to is shown at 27:38, unless I’m mistaken about your question.
Electrically, the pad just above and in the same trace as the pad that I identified as P5-2 is identical to P5-2. I specifically called out the pad I did as P5-2 because it was contained in the markings on the board. I did this because I was trying to illustrate how to read board markings as well. But I don’t think I explicitly brought out the point that the pad just above and in the same trace as the pad identified P5-2 is the same electrical location. So thanks for your clarifying question!
Did my answer clear it up for you?
Yes sir it did thank you very much. I had to go back and re watch the video a couple times and go back and forth with the schematic but I finally got it.
THanks sensei
hi, I wanted to know if my card went through. I was paying for the troubleshooting electronic control boards.
Hi Allen, No transactions with your name came through. Try it again and contact me if you’re still having trouble: http://mastersamuraitech.com/contact-master-samurai-tech/
Samurai,
I could not finish the video before I had to come say Thank you.
I always learn something from your videos, I hope to see more.
To anyone debating the $5, You CANT afford not to get the video.
Thanks again.
Glad you found it a useful and valuable training session, Dion!
very good presentation! looking forward to the fundamentals course,very soon!!
Thanks, Richard! Looking forward to having you as a student here at the Samurai Tech Academy. 🙂
Good technical insight. When I traced L1 it appeared that the machine washer pump motor was was dead also. I am a tech and kind of know how to read wiring diagrams wondering if you will someday have class on that?
Hi Robert,
You must be reading my mind! We are hard at work crafting material for our upcoming course, Advanced Schematic Analysis and Troubleshooting. This presentation on troubleshooting electronic control boards is an example of just one of the many screencasts we’re making for that course. We’ll announce the release of the course in the STA newsletter. Stay tuned!
De-Freak-a-fied Indeed! This is teaching at its best. Thank-you Scott
Thanks for watching, Chuck. Glad the screencast was helpful and illuminating for you!